TUNING THE CHASSIS
Adjusting the shift lever
9.17
Adjusting the foot brake lever stub
9.18
–
Loosen nuts
601431-10
–
Turn shift rod
Guideline
Shift rod length
Info
If the adjustment range of the shift rod is insufficient, the positioning of the
shift rod can be changed at the shift lever.
601432-10
–
Remove screw
–
Position shift rod
Guideline
Screw, shift rod
601433-10
–
Tighten nuts
Info
After the counter nuts have been tightened, the bearings of the shift shaft
must be central and aligned identically to each other in order to ensure free-
dom of movement in the bearing shells.
601431-10
–
Take off cap
–
Remove screw
601434-10
.
while installed until the shift lever is in the desired position.
.
in one of the drill holes
M6
.
.
with the foot brake lever stub.
≤ 132 mm (≤ 5.2 in)
-
. Mount and tighten screw
12 Nm
Loctite
®
(8.9 lbf ft)
50
.
243™