Configuring The Machine Using Web Image Monitor; Using Web Image Monitor - Ricoh MP 2014 series Operating Instructions Manual

8. Configuring the Machine Using Web
Image Monitor

Using Web Image Monitor

• Some items might not appear, depending on the model type you are using.
• Some items can also be configured using the control panel.
Available operations
The following operations can be performed remotely using Web Image Monitor on a computer:
• Displaying the machine's status or settings
• Configuring the machine's settings
• Registering the scan destinations
• Configuring the network settings
• Configuring the IPsec settings
• Printing reports
• Setting the administrator password
• Resetting the machine's configuration to the factory default
• Creating backup files of the machine's configuration
• Restoring the machine's configuration from backup files
• Configuring the machine's date and time
• Configuring the machine's Energy Saver mode setting
Supported Web browsers
Internet Explorer 6.0-11.0
• To operate the machine via Web Image Monitor, you must first configure the machine's TCP/IP.
For details, see page 29 "Configuring Network Settings" or see page 156 "Network Settings".
159