Ricoh MP 2014 series Operating Instructions Manual page 102

5. Scanning Originals
Item
Resolution
Density
ID Card Scan Settings (E-mail Address)
Item
Name
Destination E-mail Address
Notification E-mail Address
Subject
Sender's Name
100
Setting
Select the scan resolution from 100×100, 150×150,
Required
200×200, 300×300, or 600×600 dpi.
Specify the image density by clicking the right or left
Required buttons. These keys increase or decrease the image
density in single increments up to 5.
Setting
Name of the destination. The name specified here will
Required be shown on the screen when selecting a scan
destination. Can contain up to 16 characters.
E-mail address of the destination. Can contain up to
Required
64 characters.
E-mail address to which a notification is sent after
Optional
transmission. Can contain up to 64 characters.
Required Subject of the e-mail. Can contain up to 64 characters.
Name of e-mail sender. The name specified here will
be shown under "From" or a similar field of the
Optional
recipient's email application. Can contain up to 32
characters.
Description
Description