Configuring The Administrator Settings; Administrator Tab; Reset Settings Tab; Backup Setting Tab - Ricoh MP 2014 series Operating Instructions Manual

8. Configuring the Machine Using Web Image Monitor

Configuring the Administrator Settings

Click [Administrator Tools] to display the page for configuring the administrator settings.
This page contains the following tabs: [Administrator], [Reset Settings], [Backup Setting], [Restore
Setting], [Set Date/Time], and [Energy Saver Mode].

Administrator Tab

Administrator Settings
Item
New Password
Confirm New Password Enter the same password again, to confirm.

Reset Settings Tab

Reset Settings
Item
Reset Network Settings
Reset Menu Settings
Clear Scan Destination
Reset IPsec Settings
• [Reset IPsec Settings] appears only when the administrator password is specified.

Backup Setting Tab

• When sending the machine for repair, it is important that you create backup files in advance. The
machine's settings are returned to the default after repair.
184
Enter the new administrator password. Can contain up to 16 characters.
Select to reset settings configured under the [Network Settings] and
[Administrator Tools].
Select to reset settings that are not related to the network to their defaults.
Select to reset the scan destinations.
Select to reset the IPsec settings.
Description
Description