Setting The Rinse Aid Level; Filling With Dishwasher Detergent - Baumatic BDWI635 Instruction Manual

S etting the rinse aid level
The amount of rinse aid that the dishwasher requires also depends on
the hardness of your water. You should experiment with
s etting, until you find a level that gives the best results.
o You should continue to a
you get no water spots.
o If you get cloudiness or streaking on your dishes, the rinse aid
level is set too high and it is causing foaming during the wash
cycle. Tur n the arrow clockwise and lower the setting to the next
number.
F illing with dishwasher detergent
The detergent dispenser must be refilled at
c ycle (apart from the Rinse wash program).
o Open the lid that closes over the deter
the detergent inside of the dispenser.
o On the first wash cycle, we would
recommend that th
is set to number 4.
o If you get water spots and poor
drying performance, then you should
turn the arrow anticlockwise and
increase the setting to the next
number.
djust the rinse aid level upwards until
the start of each wash
gent dispenser and place
the rinse aid
e rinse aid level
14