Adjusting The Tension Of The Door Spring - Baumatic BDWI635 Instruction Manual

A djusting the tension of the door spring
o The door of the dishwasher is attached to springs. These are set
at the factory to ensure that they are at th
that the door can open and close smoothly.
o After the furniture door has be
the tension of the door spring.
o Fully ope n the appliance door to allow access to the adjusting
screws.
o Using a 4mm Allen key, rotate the adjusting screw which are
located on the front top corners
tighten or slacken the steel cable.
The doors spring tension is correct when:-
o
a) The door
position.
b) You are able
your fingers.
o WARNING: If you do not adjust the tension
then it could cause damage to the appliance.
remains horizontal when in the fully opened
to shut the door easily, by raising the door using
e proper tension, so
en fitted, you will need to adjust
of the appliance, to either
of the door spring,
32