Advertisement

ORDERING REPLACEMENT PARTS

To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4, Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
Tel:
08457 089 009
Outside the UK: (44) 0113 387 7133
Fax: (44) 0113 387 7125
To help us assist you, please be prepared to provide the following information:
• the MODEL NUMBER of the product (WETL13906.0)
• the NAME of the product (WESLO CADENCE S5 treadmill)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the needed part(s) (see the PART LIST and the EXPLODED
DRAWING in the centre of this manual)
Part No. 237158 R0306A
Printed in China © 2006 ICON IP, Inc.
Model No. WETL13906.0
Serial No.
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:
08457 089 009
or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
email: csuk@iconeurope.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WESLO CADENCE S5 and is the answer not in the manual?

Questions and answers

Summary of Contents for ICON Health & Fitness WESLO CADENCE S5

  • Page 1: Ordering Replacement Parts

    QUESTIONS? • the MODEL NUMBER of the product (WETL13906.0) As a manufacturer, we are com- • the NAME of the product (WESLO CADENCE S5 treadmill) mitted to providing complete customer satisfaction. If you • the SERIAL NUMBER of the product (see the front cover of this manual)
  • Page 2 CONDITIONING GUIDELINES is to burn fat, adjust the speed and incline of the tread- WARNING: mill until your heart rate is near the lowest number in Before beginning this your training zone. or any exercise program, consult your physi- cian. This is especially important for individu- For maximum fat burning, adjust the speed and incline TABLE OF CONTENTS als over the age of 35 or individuals with pre-...
  • Page 3: Important Precautions

    PROBLEM: The walking belt slows when walked on IMPORTANT PRECAUTIONS SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm (14-gauge) cord that is no longer than 1.5 m (5 ft.). WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the b.
  • Page 4: Maintenance And Troubleshooting

    MAINTENANCE AND TROUBLESHOOTING 21. Do not change the incline of the treadmill by tenance and adjustment procedures de- placing objects under the treadmill. scribed in this manual. Never remove the motor hood unless instructed to do so by an Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and 22.
  • Page 5: Before You Begin

    HOW TO LOWER THE TREADMILL FOR USE BEFORE YOU BEGIN 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left Thank you for selecting the new WESLO ®...
  • Page 6: How To Fold And Move The Treadmill

    HOW TO FOLD AND MOVE THE TREADMILL ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not HOW TO FOLD THE TREADMILL FOR STORAGE dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
  • Page 7 HOW TO CHANGE THE INCLINE OF THE TREADMILL To change the incline, first remove the incline pin from 3. With the help of a second person, raise the Uprights one of the incline legs. Adjust the incline leg to the de- (53, 54) so the Base (52) is flat on the floor as shown.
  • Page 8 5. Place the Left Handrail (56) on the Console Assembly Measure your heart rate if desired. Each program consists of 30 one-minute periods. One speed setting is programmed for each period. (91). Attach the end of the ground wire from the Console Assembly to the indicated small hole in the Left Handrail Note: The same speed setting may be pro- Before using the hand-...
  • Page 9 The lower left 8. Set the Console Assembly (91) on the Right Upright (54) HOW TO USE THE MANUAL MODE display—As you exer- and the Left Upright (not shown). Next, start four Handrail cise, the lower left dis- Bolts (3) with four Handrail Washers (13) and four play can show the Handrail Star Washers (10) (only two of each are shown) Insert the key into the console.
  • Page 10: Operation And Adjustment

    CONSOLE DIAGRAM OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear.
  • Page 11: Part Identification Chart

    Handrail Washer (11)–2 Latch Screw Console Back (8)–2 Screw (58)–4 4” Bolt (120)–2 PART LIST—Model No. WETL13906.0 PART IDENTIFICATION CHART R0306A Remove this chart and use it to identify small parts during assembly. Save this chart and the EXPLODED No. Qty. Description No.
  • Page 12 EXPLODED DRAWING—Model No. WETL13906.0 R0306A 15 15...

Table of Contents