Table of Contents
Advertisement
www.iconfitness.com
Model No. SFTL13513.6
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today,
go to www.iconservice.com/
registration.
CUSTOMER CARE
For service at any time, go to
www.iconservice.com.
Or call 1-800-999-3756
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Advertisement
Table of Contents
Related Manuals for ICON Health & Fitness Freemotion Interactive 850
Summary of Contents for ICON Health & Fitness Freemotion Interactive 850
- Page 1 www.iconfitness.com Model No. SFTL13513.6 USER’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.iconservice.com/ registration. CUSTOMER CARE For service at any time, go to www.iconservice.com.
-
Page 2: Table Of Contents
TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. . . 2 IMPORTANT PRECAUTIONS . -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product. - Page 4 19. Always stand on the foot rails when starting able to safely lift 45 lbs. (20 kg) to move the or stopping the walking belt. Always hold the treadmill. handrails while using the treadmill. 26. When folding or moving the treadmill, make 20.
- Page 6 STANDARD SERVICE PLANS...
-
Page 7: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the revolutionary reading this manual, please see the front cover of this FREEMOTION 850 INTERACTIVE treadmill. The 850 manual. To help us assist you, please note the product ® INTERACTIVE treadmill offers an impressive selec- model number and serial number before contacting us. -
Page 8: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. -
Page 9: Assembly
ASSEMBLY • Assembly requires two persons. • To identify small parts, see page 8. • Place all parts in a cleared area and remove the • Assembly requires the following tools: packing materials. Do not dispose of the packing materials until you fi nish all assembly steps. the included hex key •... - Page 10 2. Make sure that the power cord is unplugged. Remove the tie securing the Upright Wire (83) to the front of the Base (79). Next, identify the Right Upright (84). Have a sec- ond person hold the Right Upright near the Base (79).
- Page 11 4. Hold the Right Upright (84) against the Base (79). Make sure not to pinch the Upright Wire (83). Attach the Right Upright (84) with two 3/8" x 2 3/4" Screws (23), two 3/8" x 1 1/4" Screws (20), and four 3/8" Star Washers (25) as shown; do not fully tighten the Screws yet.
- Page 12 6. Attach the two Handrails (74) to the Uprights (84, 91) with two of the 5/16" x 2" Screws (2) that you removed in step 5 and two 5/16" Star Washers (8); do not fully tighten the Screws yet. Be careful not to pinch the Upright Wire (83) on the right side.
- Page 13 8. Set the console assembly (G) face down on a soft surface to avoid scratching the console assembly. Remove and discard the four indicated screws (H). Then, remove the Pulse Crossbar (80). 9. IMPORTANT: To avoid damaging the Pulse Crossbar (80), do not use power tools, and do not overtighten the #10 x 3/4"...
- Page 14 10. With the help of a second person, hold the console assembly (G) near the left and right Handrails (74). See the inset drawing. Connect the Upright Wire (83) to the console wire (I). The connec- tors should slide together easily and snap into place.
- Page 15 12. Start four #8 x 3/4" Truss Head Screws (24) into the Pulse Crossbar (80), and then tighten them; do not overtighten the Truss Head Screws. 13. Set the Left Handrail Top Cover (73) on the left Handrail (74). Start four #8 x 3/4" Truss Head Screws (24) into the Left Handrail Bottom Cover (75), the left Handrail, and the Left Handrail Top Cover.
- Page 16 14. Raise the Frame (52) to the position shown. Have a second person hold the Frame until step 15 is completed. Remove the 5/16" Nut (9) and the 5/16" x 1 3/4" Bolt (3) from the bracket on the Base (79). Next, orient the Storage Latch (56) as shown.
- Page 17 16. Firmly tighten the four 3/8" x 2 3/4" Screws (23) and the four 3/8" x 1 1/4" Screws (20). Next, slide and the Left and Right Upright Covers (89, 90) downward until they snap into place. 17. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic.
-
Page 18: How To Use The Treadmill
HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into Your treadmill, like other electronic equipment, can be the surge suppressor or into an outlet on the same damaged by sudden voltage changes in your home’s... - Page 19 CONSOLE DIAGRAM FEATURES OF THE CONSOLE You can even listen to your favorite workout music or audio books with the console’s sound system while you The treadmill console offers a selection of features exercise. designed to make your workouts more effective and enjoyable.
- Page 20 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
- Page 21 4. Change the incline of the treadmill as desired. As you exercise, the workout intensity level bar will indicate the approximate intensity level of your To change the incline of the treadmill, press the exercise. Incline increase or decrease button or one of the numbered incline buttons.
- Page 22 7. Turn on the fan if desired. HOW TO USE AN ONBOARD WORKOUT The fan features multiple speed 1. Insert the key into the console. settings. Press the fan buttons repeatedly to select a fan speed See HOW TO TURN ON THE POWER on page 20. or to turn on or turn off the fan.
- Page 23 The workout will continue in this way until the last HOW TO USE A SET-A-GOAL WORKOUT segment of the profi le fl ashes in the display and the last segment ends. The walking belt will then slow 1. Insert the key into the console. to a stop.
- Page 24 HOW TO USE AN IFIT WORKOUT If you select a competition workout, the display may count down to the beginning of the race. Note: To use an iFit workout, you must have access to a wireless network including an 802.11b/g/n router with 5.
- Page 25 8. Turn on the fan if desired. HOW TO CHANGE CONSOLE SETTINGS See step 7 on page 22. The console features a settings mode that allows you to view usage information, to personalize console set- 9. When you are fi nished exercising, remove the tings, and to set up and manage a wireless network key from the console.
- Page 26 Default Menu—The default menu will appear when Clear WiFi Setting—To erase the console’s you insert the key into the console or when you wireless network settings and have it forget the press the Home button. Press the Enter button currently selected wireless network, follow the repeatedly to select the manual main screen or the instructions in the matrix.
- Page 27 Press the up, down, left, and right buttons to high- Note: The network IFIT_SETUP will not appear light the desired letter or number. Then, press the if the console has already been configured to Enter button to select the letter, number, or symbol. connect to a wireless network.
-
Page 28: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to zero before you fold the treadmill. Then, remove left. -
Page 29: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes Regular maintenance is important for optimal perfor- as shown, the switch has tripped. To reset the mance and to reduce wear. Inspect and properly tighten power switch, wait for fi... - Page 30 SYMPTOM: The incline of the treadmill does not c. Your treadmill features a walking belt coated with change correctly high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to a. Hold down the Stop button and the Speed increase the walking belt or the walking platform unless button, insert the key into the console, and then instructed to do so by an authorized service...
- Page 31 b. If the walking belt slips when walked on, fi rst SYMPTOM: The console display has lines running remove the key and UNPLUG THE POWER through it CORD. Using the hex key, turn both idler roller screws clockwise, 1/4 of a turn. When the walk- a.
-
Page 32: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. - Page 33 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch —never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
- Page 34 NOTES...
-
Page 35: Part List
PART LIST Model No. SFTL13513.6 R0117A Key No. Qty. Description Key No. Qty. Description 5/16" x 3/4" Screw Drive Roller/Pulley 5/16" x 2" Screw Frame 5/16" x 1 3/4" Bolt 5/16" x 2 1/4" Bolt Drive Motor #8 x 3/4" Screw Motor Belt #10 x 3/4"... -
Page 36: Exploded Drawing
EXPLODED DRAWING A Model No. SFTL13513.6 R0117A... - Page 37 EXPLODED DRAWING B Model No. SFTL13513.6 R0117A...
- Page 38 EXPLODED DRAWING C Model No. SFTL13513.6 R0117A...
- Page 39 EXPLODED DRAWING D Model No. SFTL13513.6 R0117A...
-
Page 40: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...