Craftsman 536.886350 Owner's Manual page 10

ignition
Speed Shifter Lever
Remole Chute Control Lever
\
Auger Drive
Electric Startel Button
Headl
Drive Lever
Chute Deflector
e
Chute
Control
_ttteControl
Recoil Starter
Auger Housing
Height Adjust
Bolt
Auger Drive Lever - Starts and stops the
auger and impeller (snow gathering and
throwing),
Traction Drive Lever - Propels the snow
thrower forward and in reverse,
Headlight - Turns on whe_neverengine is
running.
Speed Shifter Lever - Selects the speed of
snow thrower (6 speeds forward and 2
speeds reverse).
Crank Assembly- Changes the direction ol
snow throwing through the discharge chute.
Chute Deflector - Changes the distance
the snow is thrown,
Discharge Chute - Changes the direction
the snow is thrown.
Choke Control - Used to start a cold en-
gine.
Height Adjust Skids - Adjusts the ground
clearance of the auger housing.
Ignition Key - Must be inserted to start the
engine.
Primer Button - Injects fuel directly into the
carburetor manifold for fast starts in cold
weather.
Recoil Starter Handle - Starts the engine
manually.
Throttle Control - Controls the engine
speed.
Electric Starter Button - Used to start the
engine using the 120 V, electric starter.
Remote Chute Control Lever- Push for-
ward to discharge snow high and far. Pull
remote lever back to discharge snow down°
Shear Bolls - Are special bolts that are de-
signed to break (to protect the
machine) if an object becomes lodged in
the auger housing. Use of a harder bolt will
destroy the protection provided by the shear
bolt.
CAUTION: Read owner's manual before operating machine, Never direct discharge
toward bystanders, Release the auger control bar and stop the engine betore unclog-
ging discharge chute or auger housing and before leaving the machine.
10