Lubrication; Greasing The Machine - Toro Greensmaster 3150 04358 Operator's Manual

Lubrication

Greasing the Machine

Service Interval: Every 50 hours (Immediately after every
washing)
Lubricate the grease fittings regularly with No. 2 lithium
grease.
Locate the grease fitting as follows:
•
Rear-roller-hub assembly or, if equipped with a
3-wheel-drive kit, rear-wheel-roller clutches and external
ball bearing (1) (Figure
Figure 37
•
Steering-fork shaft (1)
•
Steering-cylinder-rod end
Figure 38
37)
(Figure 38)
(Figure 38)
G017144
•
Lift-arm pivot (3) and pivot hinge (3)
•
Pull-frame shaft and roller (12)
•
Steering-cylinder end
33
(Figure 39)
Figure 39
(Figure 40)
Figure 40
(Figure 41)
Figure 41