Table of Contents
Advertisement
Safety
This machine has been designed in accordance with
EN ISO 5395:2013 and ANSI B71.4-2012 and meets
these standards when 19.5 kg (43 lb) of ballast and the
appropriate wheel weight kit are added. Compliance to
EN ISO 5395:2013 also requires additional decals and a
guard kit as described in
17)
and
7 Installing the CE Guard Kit (page
Improper use or maintenance by the operator or owner
can result in injury. To reduce the potential for injury,
comply with these safety instructions and always pay
attention to the safety alert symbol
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with the instruction may
result in personal injury or death.
Safe Operating Practices
Training
•
Read the Operator's Manual and other training material. If
the operator(s) or mechanic(s) cannot read the manual it is
the owner's responsibility to explain this material to them.
•
Become familiar with the safe operation of the equipment,
operator controls, and safety signs.
•
All operators and mechanics should be trained. The
owner is responsible for training the users.
•
Never let children or untrained people operate or service
the equipment. Local regulations may restrict the age of
the operator.
•
The owner/user can prevent and is responsible for
accidents or injuries occurring to people or property.
Preparation
•
Evaluate the terrain to determine what accessories and
attachments are needed to properly and safely perform
the job. Use only accessories and attachments approved
by the manufacturer.
•
Wear appropriate clothing including substantial,
slip-resistant footwear, safety glasses, and hearing
protection. Tie back long hair. Do not wear jewelry.
•
Inspect the area where you will use the equipment and
remove all objects that could be thrown by the machine,
such as rocks, toys, and wire.
•
Check that operator presence controls, safety switches,
and shields are attached and functioning properly. Do not
operate the machine unless they are functioning properly.
Operation
•
Do not operate the engine in a confined space where
dangerous carbon monoxide and other exhaust gasses
can collect.
6 Installing CE Decals (page
17).
(Figure
2), which
•
Operate the machine only in good light, keeping away
from holes and hidden hazards.
•
Be sure all drives are in neutral and parking brake is
engaged before starting engine. Start engine only from
the operator's position. Use seat belts if provided.
•
Slow down and use extra care on hillsides. Be sure to
travel in the recommended direction on hillsides. Turf
conditions can affect the machine's stability. Use caution
while operating near drop-offs.
•
Slow down and use caution when making turns and when
changing directions on slopes.
•
Never operate without guards securely in place. Be sure
all interlocks are attached, adjusted, and functioning
properly.
•
Do not change the engine governor setting or overspeed
the engine.
•
Stop the machine on level ground, lower the cutting units,
disengage the drives, engage the parking brake, and shut
off the engine before leaving the operator's position for
any reason, including emptying the grass baskets.
•
Stop and inspect the machine after striking objects or if
an abnormal vibration occurs. Make necessary repairs
before resuming operations.
•
Keep hands and feet away from the cutting units.
•
Look behind and down before backing up to be sure of
a clear path.
•
Never carry passengers and keep pets and bystanders
away.
•
Slow down and use caution when making turns and
crossing roads and sidewalks. Stop the reels if not
mowing.
•
Do not operate the machine when tired, ill, or under the
influence of alcohol or drugs.
•
Lightning can cause severe injury or death. If lightning
is seen or thunder is heard in the area, do not operate
the machine; seek shelter.
•
Use care when loading or unloading the machine into a
trailer or truck.
•
Use care when approaching blind corners, shrubs, trees,
or other objects that may obscure vision.
Rollover Protection System (ROPS) -
Use and Maintenance
•
The ROPS is an integral and effective safety device. Use
the seat belt when operating the machine.
•
Ensure that you can release the seat belt quickly in the
event of an emergency.
•
Check carefully for overhead clearances (i.e. branches,
doorways, electrical wires) before driving under any
objects and do not contact them.
4
Advertisement
Table of Contents
