Lubricating The Caster And Wheel Bearings; Greasing The Transmission Couplers; Greasing The Spindle Bearing - Toro 30092 Operator's Manual

4. Connect a grease gun to the fitting. Pump grease
into the fittings until grease begins to ooze out of
the bearings.
5. Wipe up any excess grease.
Lubricating the Caster and
Wheel Bearings
Service Interval: Before each use or daily
Every 400 hours
Lubricate the wheel bearings and front spindles
(Figure 23).
Figure 23
Greasing the Transmission
Couplers
Service Interval: Every 250 hours
Lubricate the transmission couplers located in the back
of the machine (Figure 24).

Greasing the Spindle Bearing

Service Interval: Before each use or daily
Grease the spindle bearing through the hole in the
mower cover (Figure 25).
25
Figure 24
Figure 25