Checking Rear Brake Fluid Level - KTM 690 SMC Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Checking rear brake fluid level

9.41
Warning
Danger of accidents Brake system failure.
–
If the brake fluid level falls below the MIN mark, this indicates a leakage in the brake system or worn-out brake linings. Have
the brake system checked in an authorized KTM workshop, and do not ride any further.
–
Remove screws
–
To adjust the basic position of the footbrake lever individually, loosen nut
screw accordingly.

Info
The range of adjustment is limited. The screw must be screwed into the footrest
bracket by at least four turns.
–
Position foot brake cylinder
travel. Hold screws
Guideline
Nut, foot brake cylinder screw
–
Check the free play of the foot brake lever. (
–
Tighten nut
600639-10
on foot brake cylinder

so that the foot brake pedal has the necessary free

in place and tighten the nuts.

.

.

M6 10 Nm (7.4 lbf ft)
p. 89)
90
and turn
