Safety Information And Precautions On How To Transport And Ship The Battery; Safety Information And Precautions On The Charger - Quickie Attitude Directions For Use Manual

Hide thumbs Also See for Attitude:
Table of Contents

Advertisement

Safety information and precautions on how to
transport and ship the battery:
Lithium-ion cells are used in the neodrives battery.
Transport and shipping of the battery are, therefore,
subject to all applicable statutory requirements, which
must be strictly observed. For instance, a defective
battery must never be transported by plane.
If your battery is defective, take it personally to your
specialist dealer as shipping lithium-ion batteries by post
or other carriers is subject to strict rules and regulations.
Once again, we recommend that you contact your
specialist dealer.
As transport regulations may change annually, we
strongly recommend that you consult your travel operator,
airline or shipping line before you set out on your trip in
order to learn about the current applicable regulations. A
defective battery must not be taken on a plane or put in
your luggage.
If your battery is fitted to the add-on bike when being
transported, relaxed transport regulations apply in
accordance with UN3171.
NOTE:
• Make sure you keep the packaging container of the
battery in case you need to transport it.
• Discuss transportation with your specialist dealer prior
to shipping.

Safety information and precautions on the charger:

Before starting the charging process, read and
follow all instructions and precautions enclosed
with the charger and the following precautions
and safety information.
•• Only use the designated charger to charge the battery.
Your specialist dealer can provide the relevant
information.
•• Using an unsuitable battery charger can lead to
malfunction and result in the battery having a limited
service life. There is also a danger of fire and explosion.
•• The charging process ends automatically as soon as
the battery is fully charged. This avoids overcharging.
•• When the charging process is complete, we
recommend disconnecting the charger from the mains
socket first before disconnecting it from the battery.
•• Never use a charger that is not recommended by your
specialist dealer.
•• Do not expose the charger to moisture of any kind
during charging (water, rain water, snow, etc.).
•• Do not carry out the charging process in rooms where
moisture may affect the charger.
•• Be aware of condensation. If the charger is brought
from a cold into a warm room, condensation may form. In
this case, refrain from
using the charger until all condensation has dissipated.
Please note that this may take several hours.
42
•• Never carry the charger by its power cable or the
charger cable.
•• Never tug at the power cable to disconnect the charger
from the mains socket.
•• Never subject cable and plug to any pressure.
Overstretching or bending the cable, pinching a cable
between a wall and a window frame or placing heavy
objects on a cable or a plug may result in electric shock
or fire.
•• Lay the power cable and the attached charging cable
so that nobody can step on it or trip over it and so both
cables are protected against any other harmful effects or
stress.
•• Do not operate the charger if the power cable, the
charging cable or the plugs attached to the cables are
damaged. Damaged parts must be replaced immediately
by the authorised specialist dealer.
•• Do not use or disassemble the charger when it has
received a hard blow or was dropped or damaged in
another way. Take the damaged charger to a specialist
dealer who has been authorised to perform repairs.
•• The charger must not be used by children.
•• Never attempt to disassemble or modify the charger.
•• Do not cover the charger during the charging process
or place any objects on top of the device.
•• Never connect the terminals of the charging plug with
any metal objects.
•• Ensure that the plug is firmly inserted in the socket.
•• Never touch plugs with wet hands.
•• Do not use the plug of the charger and/or the mains
plug if they are wet or dirty. Before inserting it, clean the
plug using a dry cloth.
Attitude/Attitude Hybrid Rev.1.0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Attitude hybrid

Table of Contents