Adjusting The Pedal Position; Adjustment; Handles - Quickie Attitude Directions For Use Manual

4.0 Adjusting the Pedal Position

Adjustment:

The default position of the crank is based on data which
dipicts the average best fit. If this is not suitable for you,
please contact your authorized Sunrise Medical dealer.
The pedal position can be adjusted to the user, (arm
length and body position), by an authorized dealer in
accordace with available adjustment options,
WARNING!
• The cranks must not touch the knee or thigh while
pedalling, especially through bends.
• Do not allow the elbows to completely extend when
the crank handles are furthest away from the body.
• If you have poor seating stability, or weak trunk
muscels, a suitable restraint must be used. Please
contact your therapist, doctor or authorized dealer.
The pedal position can be adjusted at least 0- 5cm
forward and 0 -1 cm upward, (Fig.4.2).

Handles:

WARNING!
• The handles must be held firmly with both hands whilst
driving and held so that the cables always are oriented
upwards.
• Cables should never be kinked or trapped, as this
could cause damage and loss of function.
10
Fig.4.1
Spacer
S1 = 15mm
S2 = 25mm
S3 = 35mm
Fig.4.2
69 mm
X
Fig.4.3
Docking Bottom
Position 1.
Docking Bottom
Position 2.
Fig.4.4
126 mm
Bottom
Docking
Position 1
Fig.4.5
146 mm
Bottom
Docking
Position 2
Attitude/Attitude Hybrid Rev.1.0
Docking Top Docking Top
Position 2 Position 1
Y