Smart Man-Machine Interface (Smmi); Controller - Quickie Attitude Directions For Use Manual

3.0 smart Man-Machine Interface (sMMI)

Controller:

The controller fitted to the handlebar of your Attitude is
used to access menus and activate functions in the sMMI.
The following functions are stored:
Button 1 = UP (one step upwards)
Button 2 = confirm menu key or selection
Button 3 = DOWN (one step downwards).
Interface:
The sMMI is fitted to the handlebar or stem of your
Attitude. Using the controller's buttons, (Fig.3.1), you can
access various functions and activate or deactivate
parameters.
For some functions you can also permanently store
various parameters in the software of the sMMI (see
section "Firmware Updates").
Please contact your specialist dealer in this regard, they
will be happy to advise.
The following provides an overview of the menu structure
of the sMMI:
Start Symbol Display
Start
Activate Assistance Level
Activate Recuperation
Activate Pushing Aid
Activate Speed
Activate Remaining Range
Activate Remaining Energy
Activate Travel Information
Activate Warning Symbols
•
24
Transfer Software Updates to the Motor
Back
Back
Switch Off
Menu
Tour Reset
Travel Mode
Braking
Assistant
Pushing Aid
Settings
Fig.3.1
1
2
3
NOTE:
• Short-cut : Activating the Pushing Aid: push up button
(1) for 2 seconds.
• Short-cut: Tour reset: push down button (3) for 2
seconds.
O.K
Boost
Tour
Eco.
On
Speed Selection
Off
On
Off
Back
Easy Dispay
On / Off
Year / Month / Day
Date
Hour / Minute
Time
GB
Language
Kilometers / Miles
Units
Information Software status sMMI, Motor, Battery
Attitude/Attitude Hybrid Rev.1.0