Programing Cd Tracks; Program Play - Sony hcd-tb20 Operating Instructions Manual

Playing a CD (continued)
Tips
• You can start playing from the desired track in
Normal Play or Program Play. Slide the knob to
l or to L (or press . or > on the
remote) until the desired track number appears after
step 1.
• The DISC 1 – 3 button indicator lights orange when
a CD is loaded on the tray.
All of the DISC 1 – 3 button indicators light orange
for the first time you turn on the system, and then
go out if the system determines that a CD is not
loaded after the CD tray is closed, etc.
GB
10
Downloaded From Disc-Player.com Sony Manuals

Programing CD tracks

— Program Play

You can make a program of up to 25 tracks.
1
Press FUNCTION repeatedly to switch
the function to CD.
2
Press PLAY MODE/TUNING MODE
repeatedly until "PROGRAM" appears.
3
Press DISC 1 – 3 to select a CD.
To program all the tracks on a CD at once,
proceed to step 5 with "AL" displayed.
4
Slide the knob to l or to L (or
press . or > on the remote) until
the desired track number appears.
Selected CD and
track number
5
Press ENTER/YES.
The track is programed.
"STEP" appears, followed by the number of
the track in the programed sequence. The
number of the last programed track appears,
followed by the total playing time of the
program.
Last programed
track number
Playing time of
the selected track
Total playing time