Inserting Two R6 (Size Aa) Batteries Into The Remote; Attaching The Speaker Pads - Sony hcd-tb20 Operating Instructions Manual

Jack type B
AM loop antenna
3 For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
4 Connect the power cord to a wall outlet.
The demonstration appears in the display.
If the plug of the power cord does not fit
your wall outlet, attach the supplied adapter
on to the plug (for models with a plug
adapter). To turn on the system, press ?/1.
When carrying this system
Perform the following procedure to protect
the CD mechanism.
1
Make sure that all discs are removed
from the system.
2
Press FUNCTION repeatedly until "CD"
appears.
3
Press FUNCTION while holding down
DISC 1 until "LOCK" appears.
4
Unplug the power cord.
Downloaded From Disc-Player.com Sony Manuals
Extend the FM lead antenna
horizontally
VOLTAGE SELECTOR
230-
240V
220V
120V
Inserting two R6 (size AA)
batteries into the remote
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
Attaching the speaker
pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speaker and
prevent it from slipping.
e
E
E
e
7
GB