Programing Cd Tracks; Program Play - Sony DX60AV Operating Instructions Manual

1
Press CD.
2
Press PLAY MODE repeatedly until the
mode you want appears in the display.
Select To play
ALL DISCS All CDs in the disc tray
(Normal Play) continuously.
1DISC The CD you have selected
(Normal Play) in original order.
SHUFFLE ALL The tracks on all CDs in
DISCS random order.
(Shuffle Play)
SHUFFLE The tracks on the CD you
1DISC (Shuffle have selected in random
Play) order.
PROGRAM The tracks on all CDs in the

(Program Play)

order you want them to be
played (see "Programing
CD tracks" on this page).
3
Press hH (or nN on the remote).
Other Operations
To Do this
Press x.
Stop play
Press X. Press again to resume
Pause
play.
During play or pause, press >
Select a track
(to go forward) or . (to go
back).
Find a point During play, press and hold M
(to go forward) or m (to go
in a track
back). Release it when you find the
desired point.
Select a CD in Press DISC 1 – 3 or DISC SKIP
stop mode EX-CHANGE (or D.SKIP on the
remote).
To Do this
Switch to CD Press DISC 1 – 3 (Automatic
function from Source Selection). However, if a
another source CD is used in a program, play does
not start even if you press CD 1 –
3.
Remove a CD Press Z OPEN/CLOSE.
Exchange other Press DISC SKIP EX-CHANGE.
CDs while
playing
Play repeatedly Press REPEAT during play until
(Repeat Play) "REPEAT" or "REPEAT 1"
appears.
REPEAT*: For all the tracks on
the CD up to five times.
REPEAT 1**: For a single track
only.
To cancel playing repeatedly, press
REPEAT until "REPEAT" or
"REPEAT 1" disappears.
* You cannot select "REPEAT" and "SHUFFLE
ALL DISCS" at the same time.
** When you select "REPEAT 1", that track is
repeated endlessly until REPEAT 1 is canceled.
Note
The play mode cannot be changed while playing a
disc. To change the play mode, press x first to stop
play.

Programing CD tracks

–– Program Play
You can make a program of up to 32 tracks
from all the CDs in the order you want to play
them.
1
Press CD, then place a CD.
2
Press PLAY MODE repeatedly until
"PROGRAM" appears in the display.
continued
11