Programing Cd Tracks; Program Play; Display - Sony GX20 Operating Instructions Manual

Programing CD tracks

— Program Play

You can make a program of up to 25 tracks
from all the CDs in the order you want to play
them.
1
Press CD.
2
Press PLAY MODE on the remote
repeatedly until "PGM" appears in the

display.

3
Press one of DISC 1 – 3 to select a CD.
To program all the tracks on a CD at once,
proceed to step 5 with "AL" displayed.
4
Press . or > until the desired
track appears in the display.
Disc tray number
Selected track number
5
Press ENTER on the remote.
The track is programed. The program step
number appears, followed by the total
playing time.
GB
12
Total playing time
(including selected track)
6
Program additional discs or tracks.
To program
Other discs
Other tracks on the
same disc
Other tracks on other
discs
7
Press H (or N on the remote).
Other Operations
To Do this
Cancel Program Press PLAY MODE on the
Play remote repeatedly until "PGM"
and "SHUF" disappear.
Clear a track from Press CLEAR on the remote in
the end stop mode.
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press CD,
then press H (or N on the remote).
• "--.--" appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over.
Repeat steps
3 and 5
4 and 5
3 to 5