Programing Cd Tracks - Program Play - Sony MHC-GS200 Operating Instructions Manual

Note
"ALBM" or "ALBM SHUF" appears even if you
have selected a non-MP3 disc or an MP3 disc with no
folders. In this case, the disc is played in the
"1 DISC" or "1 DISC SHUF" play mode,
respectively. See "Playing a disc with MP3 files" on
page 18 for MP3 files.
Other Operations
To Do this
Press STOP x (or x on the
Stop play
remote).
Press PAUSE X (or X on the
Pause
remote). Press again to resume play.
During play or pause, press > (to
Select a track
go forward) or . (to go back).
During play, press and hold M (to
Find a point in
go forward) or m (to go back).
a track
Release it when you find the desired
point.
Select a folder Press ALBM – or ALBM +
of MP3 files repeatedly after step 2.
Select a CD in Turn DISC SELECT to the right (to
stop mode go forward) or to the left (to go
back) and release it when you reach
the desired CD (or press DISC + or
DISC – on the remote).
Play repeatedly Press REPEAT/FM MODE (or
(Repeat Play) REPEAT on the remote*
play until "REP" or "REP 1"
appears.
2
REP* : For all the tracks on a CD
up to five times (or endlessly for
MP3 files when "SHUF" is
displayed).
3
REP 1* : For a single track only.
To cancel Repeat Play, press
REPEAT/FM MODE (or REPEAT
on the remote*
"REP 1" disappears.
1
* MHC-GS200 only
* 2 For all the tracks on all CDs, press PLAY MODE/
DIRECTION (or PLAY MODE on the remote*
repeatedly in stop mode to select "ALL DISCS".
However, you cannot select "ALL DISCS SHUF"
and "REP" at the same time.
3
* When you select "REP 1", that track is repeated
endlessly until Repeat Play is canceled.
1 ) during
1
) until "REP" or
1
)
Programing CD tracks
— Program Play
You can make a program of up to 25 tracks
from all the CDs in the order you want to play
them.
1
Press CD to switch the function to CD.
2
Press PLAY MODE/DIRECTION (or
PLAY MODE on the remote*) repeatedly
until "PGM" appears.
3
Turn DISC SELECT (or press DISC – or
DISC + on the remote) to select a CD.
To program all the tracks on a CD at once,
go to step 5 with "CDAL" displayed.
4
Press . or > repeatedly until the
desired track appears.
Disc number
Selected track
number
5
Press ENTER.
The track is programed. The programed
track and corresponding step (playing order)
appear.
6
Program additional discs or tracks.
To program
Other discs
Other tracks on the
same disc
Other tracks on other
discs
7
Press n N.
Playing time of
selected track
Repeat steps
3 and 5
4 and 5
3 to 5
continued
15
US