Winch (Bearcat Z1 Xt Gs); Towing - Arctic Cat BEARCAT F5 Operator's Manual

Winch (Bearcat Z1 XT
GS)
This snowmobile is equipped with a
winch. There are two mounting locations.
The front mounting location is for actual
use of the winch (see the winch guide)
and should not remain in this location
when operating the snowmobile. The
tunnel mounting location is for "storing"
the winch when not in use and should
remain in this location when operating
the snowmobile.
To relocate the winch, use the following
procedure.
1. Remove the receiver pin and the hair-
pin clip securing the winch.
22
2. Place the winch in the desired posi-
tion; then secure it with the hairpin
clip and the receiver pin.

NOTE: When operating the snow-
mobile, always have the winch in the
tunnel mounting location secured
with the hairpin clip and the receiver
pin.

Towing

If the snowmobile is to be towed by
another snowmobile, do not tow using
the loops in the skis. The tow rope should
be attached to the spindles.
0745-806