4 Controls
4.13
Horn button
To actuate the horn, press the horn button
(1).
4.14
Winch switch
The winch switch (2) has two switch posi-
tions:
– OUT (1): rope is unwound.
– IN (3): rope is wound.
To select the desired function, move the
winch switch (2) to the corresponding posi-
tion.
WARNING
For the operation of the winch,
observe the user manual of the
winch.
4.15
Starter button
Starting the engine:
1.
Press starter button (1). Release
starter button (1) as soon as the
engine is running.
NOTE
Before starting the engine, check
the following:
Is the ignition key in the ON posi-
tion?
Is idle set?
Is the foot brake or the hand
brake activated?
26
Fig. 19
Fig. 20
Fig. 21