Detroit Diesel Series 60 EGR Technician Manual page 74

DDDL/SNAPSHOTS
5. Some important facts to remember about this feature:
All parameters broadcast by DDEC IV are recorded.
Any codes that occur during the snapshot are automatically marked.
There is no practical time limit for the snapshot, you just need enough room on
your hard drive to save the file.
To mark an event other than a code, click once with the left mouse button on the
Mark User Event SPACE box.
To insert additional comments about the snapshot click once with the left mouse
button on the Annotate selection (version 4.1 or later).
6. When you have completed recording the data you wish to save, click once with the left
mouse button on the Stop Recording ESC box.
7. Immediately upon selecting the Stop Recording ESC option a dialog box will appear
asking if you wish to save your changes. If you want to save the recorded data to your
hard drive, click once with the left mouse button on the Yes option. To discard the data
recorded by the snapshot click on the NO option.
6-2
All information subject to change without notice. (Rev. June 2005)
7SE60 0506 Copyright © 2005 DETROIT DIESEL CORPORATION