Pop-Up Messages - Kurzweil Forte 7 Musician's Manual

Pop-Up Messages

Some actions cause the display to show pop-up messages. After a short time the display
returns to show the current Program.
MIDI In/Out Activity Indicators
MIDI In/Out activity indicators are displayed at the top of the screen (shown as 2 MIDI
port symbols with "I" for "in" and "O" for "out"). These indicators briefly light up when
MIDI has been recently sent to or received by the Forte's MIDI/USB ports. If the symbol is
green, this indicates there has been MIDI activity on that port in the last few seconds. If the
symbol is red, this indicates there has been communication with the external software editor
on that port in the last few seconds. If the symbol is grey, this indicates there has been no
MIDI activity on that port in the last few seconds.
Alpha Wheel & Previous (–) and Next (+) Value Buttons
Use the Alpha Wheel or the Previous (-) and Next (+) buttons, to the right of the display below
the Alpha Wheel, to change the current Program. Turning the Alpha Wheel counter-clockwise
or pressing the Previous button will select the previous Program and turning the Alpha Wheel
clockwise or pressing the Next button will select the next Program.
NOTE : The display can be changed to an alternate layout by
pressing the "VIEW" soft button, or changing the "Display"
parameter in Global Mode.
Program Mode
Selecting Programs
6-5