Table of Contents
Advertisement
ISSUE
The volume slider is turned down.
REMEDY
Slowly push the volume slider up.
The volume control on the audio system or mixer is turned
ISSUE
down.
REMEDY
Slowly turn the volume control up.
The signal source selection on the audio system or mixer is
ISSUE
incorrect.
Set the volume of the audio or mixer to the lowest level, select
REMEDY
the correct signal source, and then slowly turn up the volume.
The audio cables are not securely plugged into the Forte,
ISSUE
audio system, or mixer.
Set the volume of the audio or mixer to the lowest level, securely
REMEDY
plug in the audio cables on both ends, and then slowly turn up
the volume.
ISSUE
The Destination parameter stops MIDI Data.
Change the Global Mode (MIDI page) "Destination" parameter
REMEDY
to USB+MIDI+LOCAL (see page 10-13)
ISSUE
The audio cable is of an incorrect type.
Obtain and securely connect an audio cable of the correct type.
REMEDY
The Forte accepts both balanced (TRS) and unbalanced (TS)
1/4-inch audio cables.
Troubleshooting
Common Problems
13-3
Advertisement
Table of Contents
