Table of Contents
Advertisement
Parameter
Use the cursor buttons to select a parameter in the left column, and use the Alpha Wheel,
Value buttons, or cursor up/down buttons to scroll through parameters in that column.
Effect Chain parameters are named with prefixes based on their effect type, either "INS" for
parameters from Insert effects, or "AUX1/AUX2" for parameters from Aux effects. Effect
Chain parameters are also shown with different background colors to help visually separate
Insert and Aux parameters.
The parameter column will also display any available VAST synthesis parameters for the
current program and parameters for the current program's insert and auxiliary 1 and 2 effects
(if effects are in use.) All available parameters are listed.
Control
Use the Control (middle) column to set one of the Forte's physical controllers as a control
source for a parameter. Use the Alpha Wheel or the Value buttons to choose one of the
Forte's physical controllers as a control source, or choose a value of None if you don't want to
use a physical controller for this parameter. You can also choose a value of None by entering
-1 with the keypad function of the Category buttons followed by the Enter button.
To choose an external MIDI CC number as a control source, you can enter the number
of the controller with the keypad function of the Category buttons followed by the Enter
button, or using the Alpha Wheel or the Value buttons. Also, the Forte's physical controllers
each use one of the available MIDI CC numbers, so you must choose one of the other
available CC numbers when using an external MIDI control source or else the parameter will
also be controlled by a Forte physical controller.
This list shows the MIDI CC numbers associated with each controller. The Forte's physical
controllers are highlighted in bold type. This list can be helpful when changing the Control
for a parameter. For example, to set a parameter to be controlled by the Zone 1 Switch, you
can quickly select it by entering 80 for the control, followed by pressing the Enter button.
None
MIDI 0
Mod Wheel (MIDI 1)
MIDI 2 to MIDI 3
CC Pedal 2 (MIDI 4)
MIDI 5 to MIDI 10
CC Pedal 1 (MIDI 11)
Slider A (MIDI 12)
Slider B (MIDI 13)
MIDI 14 to MIDI 21
Slider C (MIDI 22)
Slider D (MIDI 23)
PARAMETER CONTROLS
Slider E (MIDI 24)
Slider F (MIDI 25)
Slider G (MIDI 26)
Slider H (MIDI 27)
Slider I (MIDI 28)
Variation (MIDI 29)
MIDI 30 to MIDI 63
Sw. Pedal 1 (MIDI 64)
MIDI 65
Sw. Pedal 2 (MIDI 66)
Sw. Pedal 3 (MIDI 67)
MIDI 68 to MIDI 79
Program Edit Mode
Program Pages
Zone 1 Switch (MIDI 80)
Zone 2 Switch (MIDI 81
Zone 3 Switch (MIDI 82)
Zone 4 Switch (MIDI 83)
MIDI 84
Switch 1 (MIDI 85)
Switch 2 (MIDI 86)
Switch 3 (MIDI 87)
MIDI 88
Switch 4 (MIDI 89)
Switch 5 (MIDI 90)
MIDI 91 to MIDI 127
7-5
Advertisement
Table of Contents
