Preparations; Activating The Link 200; Choosing The Correct Position - TomTom LINK 200 Reference Manual

Preparations

Activating the LINK 200

You need to activate the LINK 200 before you can install and use it.
To activate your LINK 200 you need the following:
A computer or a smartphone with internet connection.

The activation code of your LINK 200, which you can find in your WEBFLEET contract confir-

mation.
The customer number stated in your WEBFLEET contract confirmation.

The serial number of your LINK 200.

To activate your LINK 200 go to http://business.tomtom.com/activation and follow the instructions.

Choosing the correct position

First you need to choose the correct position in which to install your LINK 200.
Take the following into consideration:
Do not expose the LINK 200 to direct sunlight and/or high temperature for long periods to

ensure proper operation.
To ensure GPS reception using the integrated GPS receiver, the top of the device must not be

obstructed by metal items.
To ensure mobile network reception using the integrated antenna, the device must not be

placed on or surrounded by metal items such as the vehicle's coachwork closer than 5 cm (2
inches) and the top side must not be obstructed by metal items.
If the OBD-II connector of your vehicle does not provide enough space to insert the LINK 200,

you can use the OBD-II extension cable from TomTom Telematics.
6