Erasing The Temperature Data From Memory - Omega Engineering OMEGASCOPE OS523E User Manual

2.3.16 Erasing the Temperature Data from Memory

The user can erase all 800 temperature data points in
memory at any time by using the following procedure:
1.
2.
3.
4.
Using the Handheld Infrared Thermometer
Pull the trigger and press the
icon will appear.
Press the
key until reaching the MEM or LOG
FUNC
disply mode.
Press the then
display shows ERASE on the top and it will beep to
indicate that the stored data is erased.
Erasing the temperature data does not erase or
reset Emissivity, High and Low Alarm setpoints,
printing interval and Ambient Target Temperature
compensation
After all data is erased from memory, double click
trigger to unlock the trigger.
key. The
LOCK
keys in rapid sequence. The
LOCK
NOTE
2
2-29