Omega Engineering OMEGASCOPE OS523E User Manual page 28

LCK
Do not operate the built-in distance module and laser sighting at
the same time while operating from the batteries. It places a heavy
load on the batteries.
Using the Handheld Infrared Thermometer
The built-in version (-DM) is an integal part of the
thermometer, and distance measurment is made using the
thermometer's keypad. Go to the d_F or d_M display
menu. There is a slide power switch on the side of the
distance module housing. Make sure the power switch is
ON. Pull the trigger for about 2 seconds, and the upper
display will show the distance to the target either in Feet or
Meter. Releasing the trigger will turn off the distance
measurement, and distance value will stay on for about 3
seconds. Pressing the
value from Feet to Meters and vise versa.
0'
2"@ 0
5.0"
13
5 @ 0
0
1.0
Figure 2-16. Field of View of Built-in Distance Module
F
key will convert the distance
C
NOTE
DISTANCE MODULE TO OBJECT (FT)
3'
5'
7.0"
18
1.5
DISTANCE MODULE TO OBJECT (M)
10'
18.0"
12.0"
D:S 10:1
=
30
3.0
2
16'
46
5.0
2-13