Erasing The Temperature From Memory - Omega Engineering OS550 Series User Manual

3
Using the Infrared Thermometer/Transmitter
3.5.10 Erasing the Temperature Data from Memory
3-24
The user can erase all 100 temperature data points in
memory at any time by using the following procedure:
1. With power applied to the unit, place the SLEEP/ON
switch to the ON position.
2. Press the
3. Place the SLEEP/ON switch to the SLEEP position.
4. Press the
sequence.
If the
Steps 1 and 2.
The display freezes momentarily, and a beep
sounds for about 1 second. Now the memory is
cleared. The thermometer reverts to real time mode.
Erasing the temperature data does not erase or
reset your pre-set Emissivity, High and Low Alarm
setpoints, printing interval, and Ambient Target
Temperature compensation.
key. The
key and then the
NOTE
icon disappeared, repeat
NOTE
icon will appear.
key in rapid