Storing Temperature Data On Command; Storing Temperature Data On Command (Os533E, Os534E, Os523E, Os524E) - Omega Engineering OMEGASCOPE OS523E User Manual

2.3.14 Storing Temperature Data on Command

(OS534E, OS523E, OS524E)
The thermometer can store up to 800 temperature data
points on command. This data is stored in the non-volatile
°F
memory, so removing the batteries will not affect or erase
this data. To store temperature data:
1.
2.
3.
4.
5.
6.
Using the Handheld Infrared Thermometer
Aim at the target and pull the trigger and press the
key to lock the trigger. The
LOCK
on the display.
If necessary, press the
emissivity or press the
emissivity.
Press and hold the
Mode (MEM) appears.
Press the key to store the target temperature at the
LOCK
memory location indicated. You will hear a beep to
verify that the data is stored. Then the memory location is
incremented by one.
After all data is taken, press and hold the
until the Emissivity Display Mode (E) appears.
Press the key to unlock the trigger or pull the
LOCK
trigger twice at any time.
key to increment the target
key to decrement the target
F
C
key until the Memory Display
FUNC
2
icon will appear
key
FUNC
2-27