Cleaning The Lens; Calibrating The Thermometer; Servicing The Laser Sighting - Omega Engineering OMEGASCOPE OS523E User Manual

6
Maintenance

6.2 Cleaning the Lens

Although all lenses are quite durable, take care to prevent scratching
when cleaning them. To clean the lens:
1. Blow off loose particles, using clean air.
2. Gently brush off remaining particles, using a camel hair brush.
Alternatively, clean any remaining contaminants with a damp, soft,
clean cloth. Be careful not to rub too hard.
Do not use any ammonia or cleaners with ammonia on the lens,
as damage may result. Do not wipe the surface dry, as this may
cause scratching.

6.3 Calibrating the Thermometer

The thermometer can not be calibrated by the user. For precise
calibration of the thermometer, call our Customer Service
Department. It is recommended that the Infrared Thermometer
to be sent to the factory once a year for recalibration.

6.4 Servicing the Laser Sighting

Servicing and maintenance is not required to keep the laser
sighting in proper operating condition. In the event of a
malfunction, the unit should be returned to the manufacturer
for repair.
6-2
CAUTION