Product Specifications - ElectrIQ eiQ-R900M User Manual

Errors Codes
.
Error Message
E1 Front Cliff Sensor
E2 Charging Error
E3 Front Bumper Error
E4 Battery Over-Heating
E5 Left Wheel Overloaded
E6 Right Wheel Overloaded
E7 Side Brushes Overloaded
E8 Rolling Brush Overloaded
E9 Vacuum Motor Overloaded
Dust-Bin Full Reminder
00

Product specifications

Power supply
Rechargeable battery
Charging time
Operating Time
Cleaning Efficiency
Dustbin capacity
Cleaning area diameter
Dimension (wxdxh)
Net weight
Cleaning r
Suggested Actions
The robot might be trapped in a specific area where there are stairs or floor edge.
Please refer to the correct installation process of the charging dock and try it again
The robots front bumper is stuck. Check the front bumper
Stop using the robot for at least 60 minutes and then restart it again. If the
message still shows up, please contact your local warranty centre provider.
Check the left wheel, and remove any objects stuck
Check the right wheel, and remove any objects stuck
Check both side brushes to remove any jammed objects or debris
Check the rolling brush to remove any jammed objects or debris
Stop using the robot for at least 60 min and then restart it again. If this message
still shows up, please contact your local warranty centre provider
When dust bin is full, the error message display will show 00. Please clean up the dust
bin prior to the use of the robot again.
Input: 100-240VAC 50-60Hz, 1 A
Output: 20V DC, 1 A
NIMH 14.4 V, 2200MAH
2.5 hrs
Max 90 min.
99.8%
0.6 l
360 mm
330x330x79 mm
2.5 kgs
22