ElectrIQ eiQ-R900M User Manual page 14

1. Start/Stop Button:
Press this button and it will light up blue. The robot is activated to
perform the cleaning cycle. Press the button again to stop the cleaning
cycle.
2. Timer
Different cleaning time Settings options are available. Users may use their
remote control to enter specific cleaning time settings (e.g. 10 mins, 20
mins, 30 mins ... 80mins etc.) the selected setting will be shown on the
display. When the robot is activated the default cleaning time setting is
the last previous time set.
3. Display of Timer/Cleaning Mode
There are several patterns that the robot uses during the cleaning process.
Spot Spiral
1.
Special Bounce
2.
Wall Following
3.
Zig-zag
4.
Polygonal Spiral
5.
A. Automatic (the combination of patterns 1-5)
The user may use their remote control to select a specific cleaning
pattern. The number or letter "A" will be shown on the display.
When the robot starts to return to the charging dock, the letter "H" will be
shown on the display.
Users may also interrupt the cleaning cycle by pressing the "Home" button on
the remote control. When the command is entered, the robot will stop
cleaning and go back to the dock.
4. Soft-touch
When this function is activated, the robot will slow down its moving speed in order
not to collide with any objects when cleaning. This function is ideal on cluttered
spaces.
5. Vacuum motor
The robot cannot perform the cleaning process without the activation of the vacuum
motor function.
14