Zone Divider - ElectrIQ eiQ-R900M User Manual

Notes:
1. Charge the robot for at least 24 hours before the first use.
2. Each time the robot is fully depleted charge for at least 3 hours.
3. Never use the robot in temperatures less than 0℃ or over 40℃ as this will
reduce the battery life and performance.
4. It is normal for the temperature of the charger to increase during the charging
process
Notes: All the settings are disabled while battery is charging. LCD screen will be on
and the timer and the battery icon is flashing and the charged percentage is showing.

Zone divider

The zone divider creates an invisible ultrasonic barrier that eiq-R900M will not cross.
1. The zone divider is powered by 2 AA batteries. Make sure to install the AA
batteries with correct polarity.
2. To turn on the zone divider, slide the power switch to "ON" position.
3. When turned on, the blue LED light blinks for 70 seconds, then turns into
standby mode. When eiq-R900M starts working, the Virtual Wall will turn on and
shows blue LED light.
4. The best effective distance of Virtual Wall barrier is about 3M (10 ft).
5. The LED light will blink when the Virtual Wall is low on battery.
11