Connecting An Analog Mixer - Roland S-4000M Owner's Manual

Reac merge unit

Hide thumbs Also See for S-4000M:

Table of Contents

Connecting Peripheral Devices

Connecting an Analog Mixer

When connecting an analog mixer, you can connect an S-4000H or S-4000S-0832 to REAC port A on the S-4000M. Connect the

analog input and output of the S-4000H or S-4000S-0832 to the mixer.

Set REAC mode of the S-4000H or S-4000S connected at REAC port A to "Master." For information about mode settings and operation in the

various modes, refer to the owner's manuals for the respective models.

When the S-4000M detects the connected S-4000H or S-4000S and REAC communication starts, the[A] of [LINK] indicator in REAC STATUS flashes.

If this does not flash, try detaching and reconnecting the cables and switching the power on and off.

fig.connect-analog.eps

This example lets you configure a 32-in/8-out system. The number of input channels varies (from 8 to 32 channels) according to

the type and number of digital snake devices connected to REAC ports 1 through 4 on the S-4000M.

The number of output channels remains unchanged at 8.

FOH

S-4000H

STAGE

Table of Contents