About Cord Hook
Secure the power cord in place using the cord hook as shown below. This can help prevent power loss due to the plug being
pulled out if the power cord is accidentally yanked.
1.
Detach the cord hook.
Remove the two retainer screws and detach the cord hook.
fig.lift-cramp.eps
2.
Connect the power cord to the AC INPUT connector.
fig.connect-AC.eps
3.
Secure the power cord in place with the cord hook.
Clamp the cord hook onto the power cord and secure it in place using the two screws you removed in step 1.
fig.down-cramp.eps
Power Supply
13