Checking The Headlight Setting; Adjusting The Headlight Range - KTM 1190 RC8 R Owner's Manual

14 ELECTRICAL SYSTEM
14.8

Checking the headlight setting

A 0 0 A
14.9

Adjusting the headlight range

–
Stand the vehicle upright on a horizontal surface in front of a light wall and make a
mark at the height of the center of the low beam headlight.
–
Make another mark at a distance
Guideline
B 0 0 B
Distance
–
Position the vehicle vertically at a distance
low beam.
Guideline
400420-10
Distance
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle is
ready to operate with the rider mounted along with any luggage and a passenger if
applicable.
» If the boundary between light and dark does not meet specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (

under the first mark.


p. 218)
5 cm (2 in)
 in front of the wall and switch on the
5 m (16 ft)
p. 218)
218