Preparing For Use After Storage - KTM 1190 RC8 R Owner's Manual

19 STORAGE
19.2

Preparing for use after storage

–
Raise the rear of the motorcycle with lifting gear. (
–
Raise the front of the motorcycle with lifting gear. (
–
Cover the motorcycle with a porous sheet or blanket.
Info
Do not use non-porous materials since they prevent humidity from escaping,
thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm
up properly, the water vapor produced during combustion condenses and causes
valves and exhaust system to rust.
–
Take the motorcycle off of the front wheel stand. (
–
Remove the rear of the motorcycle from the lifting gear. (
–
Install the battery.
–
Set the clock with SET CLOCK. (
–
Perform checks and maintenance measures when preparing for use. (
–
Take a test ride.
401059-01
( p. 204)
p. 96)
p. 167)
p. 168)
p. 168)
p. 167)
p. 118)
242