MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing the lower triple clamp
9.28
Installing the lower triple clamp
9.29
3
0 0 3
2
0 0 2
1
0 0 1
–
Position the brake line. Put the clamp on, and mount and tighten screws
–
Install the front wheel.
500200-13
x
–
Remove the fork legs.
–
Dismount the start number plate (
–
Remove the front fender. (
–
Remove screws
Info
Do not unplug the CDI control unit.
–
Remove screw
and place it on one side.
Info
Protect the motorcycle and its attachments from damage by covering them.
500099-10
Do not bend the cables and lines.
–
Remove o-ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
500100-10
x
–
Clean the bearing and sealing elements, check for damage, and grease.
Long-life grease (
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
Info
Check whether the top steering head seal
–
Push up protective ring
500098-10
(
p. 47)
x
(
p. 29)
x
p. 32)
p. 31)
and hang the CDI control unit to the side.
. Remove screw
, take off top triple clamp with the handlebar
. Remove protector ring
.
p. 86)
and O-ring
.
.
is correctly positioned.
30