Sub-Zero BI-36R Design Manual page 94

UN DER CO U NT E R R E F RIG E R AT IO N
Custom Panel
For overlay undercounter models, custom door panels and
handle hardware must be provided. Refer to the charts for
panel requirements and dimensions.
Finish all sides of the custom panels. They may be visible
when the door is open or through the window of glass door
models.
PA N E L REQ UIREMENTS
WE IG H T P ER PANEL
UC-24R, UC-24C(I)
UC-24BG
UC-15I(P)
PAN EL THI CKNES S
All Panels
|
94 Sub-Zero Customer Care 800.222.7820
M O D E L U C - 2 4 B G
For model UC-24BG, the custom door panel will attach
directly to the door frame with screws through a series of
pre-drilled holes. Refer to the illustration below.
Do not install a solid panel on a glass door unit. A solid door
is available as a sales accessory and must be installed if a
solid panel is being specified. Service may be required to
install the door. Contact an authorized Sub-Zero dealer for
MA X
more information. Overall dimensions are the same for glass
20 lb
(9 kg)
and solid door panels.
10 lb
(5 kg)
15 lb
(7 kg)
MIN
5 / "
(16)
8