Bi-42Sd - Sub-Zero BI-36R Design Manual

BUILT-I N RE FR IG E R AT ION
Custom Panels
PART IA L FR A ME D O PT IO N
The partial framed kit includes a stainless steel panel for
above and below the external dispenser. Refer to the chart
below for panel width. The kit is avail able through an autho-
rized Sub-Zero dealer. For local dealer information, visit the
find a showroom section of our website, subzero.com.
PA RT IAL FR AM ED PANEL

BI-42SD

BI-48SD
|
20 Sub-Zero Customer Care 800.222.7820
PA N E L M OU N T IN G K I T
A Sub-Zero custom panel mounting kit eliminates the need
for a backer and spacer panel and is avail able through an
authorized Sub-Zero dealer. For local dealer information, visit
the find a showroom section of our website, subzero.com.
The kit consists of mounting cleats, screws and gages used
to properly position the cleats. The kit is available for all
built-in models except glass door models. Dual installations
W
require two mounting kits.
1
15 / "
(383)
16
18 3 / "
(476)
4
O V E R L AY PA N EL S
Overlay panels are typically created by combining a
custom panel, a .10"
panel. Refer to the illustrations below.
When installing two units side by side, refer to page 16 for
dual standard installations.
SPACER PANEL
5
1
/ "
8
Panel assembly (cross section). Panel assembly (rear view).
spacer panel and a
(3)
CUSTOM
PANEL
CUSTOM PANEL
BACKER PANEL
TRIM
/ "
16 (8) min 3
/ "
4
(19) .10"
(3) (OVERLAY)
typical
3
/ "
(19)
4
1 / " backer
(6)
4
SPACER
PANEL
BACKER
PANEL
1
/ "
(3) 4 (6)