Bi-36F - Sub-Zero BI-36R Design Manual

BUILT-I N RE FR IG E R AT ION
Custom Panels
For framed, overlay and flush inset applications, custom
door panels must be provided. Handle hardware must
also be provided for overlay and flush inset applications.
Refer to panel requirements below and the charts on pages
22–27 for custom panel dimensions for your specific design
application.
IMPORTANT NOTE: Do not cover a glass door with a solid
panel.
Finish all sides of the custom panels. They may be visible
when the door is open or through the window of glass door
models.
PA N E L REQ UIREMENTS
WE IG H T P ER PANEL
BI-36R, BI-36RG, BI-36F
All Other Models
Grille Panel
PAN EL THI CKNES S
Framed
Overlay and Flush Inset
F R A M E D PA N E L S
The framed application is an overlay model with framed
design features. It is not a separate model.
If the custom panel is thinner than
must be added to achieve a proper fit. If the panel is thicker
than 1 / " , rout an edge around the panel or mount the
(6)
4
custom panel on a sheet of
into the channel. Refer to the illustrations below.
Routing, recessing or optional extended handles may be
required for finger clearance. Refer to the full-scale template
on page 34.
When installing two units side by side, refer to page 16 for
dual standard installations.
MA X
75 lb
(34 kg)
50 lb
(23 kg)
13 lb
(6 kg)
MIN
1 /
4
1 / "
(6)
4
1
/
5 / "
4
(16)
8
DOOR
Panel 1 / " thick or less.
4
1
/ " , a filler material
(6)
4
1 / " thick material and insert
(6)
4
" 1
(6) TRIM REVEAL
"
(6) PANEL
Panel thicker than
subzero.com/specs
/ "
4 (6) min
ROUT TO 1
/ "
4 (6)
DOOR
1 / ".
4
|
19