Sub-Zero BI-36R Design Manual page 69

WINE ST O RAG E
Custom Panels
For framed, overlay, integrated and flush inset applications,
a custom door panel must be provided. Handle hardware
must also be provided for overlay, integrated and flush
inset applications. Refer to panel requirements and custom
panel dimensions charts for your specific model and design
application.
Do not install a solid panel on a glass door unit. A solid door
is available as a sales accessory (except models WS-30 and
BW-30) and must be installed if a solid panel is being speci-
fied. Service may be required to install the door. Contact an
authorized Sub-Zero dealer for more information. Overall
dimensions are the same for glass and solid door panels.
Finish all sides of the custom panels. They may be visible
when the door is open or through the window of glass door
models.
Models 424FSG and UW-24FS have a finished stainless
steel exterior that is designed to be used in a freestanding
application.
Custom Panel—424G | UW-24
For models 424G and UW-24, the custom door panel will
attach directly to the door frame with screws through a
series of pre-drilled holes.
Refer to the charts for panel requirements and dimensions.
PA NE L RE QUI RE ME NTS
W EIG HT PER PAN EL
424G, UW-24
PA NEL TH IC KN ESS
424G, UW-24
O V E R L AY PAN EL D IM EN S I ON S
A
A A H
A
W
424G, UW-24
PA NE L DIME N SI ONS
PANEL
424G, UW-24
STI LES | RAILS
Minimum
DOOR CLEARANCE
Models 424G and UW-24 can be installed flush with sur-
rounding cabinetry. Depending on the thickness of the
overlay door panel, it may be necessary to install the unit
1 / " beyond the front surface of adjacent cabinetry to
(6)
4
prevent interference when the door is opened to 145°. Refer
to the full-scale template on page 81.
MAX
10 lb
(5 kg)
MIN
5 / "
(16)
8
W H
23 3 / " 30 1 / "
(603) (764)
4 16
A
2 1 / "
(57)
4
|
subzero.com/specs 69