Brief Description - Miele CVA 4060 Operating And Installation Instructions

Brief description

This machine has a container for coffee
beans so that they can be freshly
ground on demand for every cup to
benefit fully from the flavour.
The ground coffee can also be
moistened with hot water
(Pre-brewing), to develop the aroma.
Then hot water is forced at high
pressure through the ground coffee.
If the machine is used by various
people with different tastes and
preferences, you can programme
specific settings for up to ten
individual users (User profiles).
You can also add a portion of ready
ground coffee should someone prefer
a cup of decaffinated coffee, for
example.
To prevent water from remaining in the
pipes, any water left is expelled,
resulting in a little trickle after the coffee
has been dispensed. The coffee is then
ready.
The used coffee grounds are
automatically emptied into the waste
container. There is no need to remove
the grounds manually after each cup.
The size of cup can be programmed in
so that the correct amount is
dispensed. If you decide to use a
smaller cup than the programmed cup
size, preparation can be halted at any
time by pressing the control on the
right.
If two cups of coffee or espresso are
required at the same time, the control
on the right must be pressed twice
Downloaded from CoffeeMachineManual.com Manuals
12
briefly. The machine will fill the cups in
two stages with a slight pause in
between.
The machine can be programmed to
grind from 6 to 14 g of coffee,
depending on the type. The
programmed-in amount of coffee will
be the same for all sizes of cup
(espresso, coffee, large coffee).
The fineness to which the coffee is
ground can be adjusted.
The lighting can be switched on
independently of operation. The upper
and lower lighting can also be dimmed
independently of one another.
For safety reasons, the electricity
supply to the brewing system and the
coffee grinder cuts out when the
machine door is opened. The machine
also features a system lock to prevent
children from operating the machine.
The easy to use programming facility
allows, amongst other things, the
language in the display to be changed
and the water hardness to be
programmed in.
To ensure that the flavour can develop
fully and be maintained for longer the
machine has an additional function to
automatically rinse and pre-warm the
system when the machine is cold. The
same function is used to flush coffee
remains out of the system and the
spouts after use.