Switch Off After - Miele CVA 4060 Operating And Installation Instructions

Built-in coffee machine
Hide thumbs Also See for CVA 4060:
Table of Contents

Advertisement

Settings: Customising your machine

Switch off after ...

Downloaded from CoffeeMachineManual.com Manuals
34
The tick L beside "Off" shows that the machine will not switch
on at a specific time of day.
To switch the machine on at a specific time of day,
^ Turn the right hand control until the upper option
(Set / Change) is highlighted and then press the control.
^ Set the time you want the machine to switch on at by
turning the right hand control and then pressing it.
SETTINGS F
TIMER
Switch on at
The tick will now appear beside the word "Change" and the
machine will switch on every day at the time you have set.
(This time will be shown in the display).
If rinsing is set to "On", the machine will automatically
carry out a brief rinse when it switches itself on.
If the machine has switched itself on automatically 3 times
and no drinks or hot water have been dispensed, the
machine will not switch itself on again automatically! The
programmed times will, however, remain in memory and
can be reactivated after manually switching the machine
on again. This prevents the machine switching itself on
unnecessarily, for example whilst you are away on holiday,
and you have not cancelled the automatic switching on
procedure.
To prevent the machine using electricity unnecessarily when it
is not being used, it can be set to switch off automatically.
This is done using the "Switch off after" option. A time of
between 15 minutes to 6 hours can be set. This time is
measured from the last time a drink was dispensed.
Back A
12:00 / Change L
Off

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents