Saving Data In The Specified Folder - Fujitsu PA03541-B105 Operator's Manual

5.2

Saving Data in the Specified Folder

This section describes how to save image files scanned with the ScanSnap in a shared folder. By
using this action, you can save image files scanned with the ScanSnap in a networked folder to
share information among group members.
When you scan documents with the ScanSnap, image files are created and saved in a specified
folder.
A function of launching an e-mail program to notify group members of additions to the folder is
also available. In an e-mail message, paths to the folder are stated as shown in the figure below.
ATTENTION
The e-mail software used are the applications specified in the following;
•
For Mac OS X v10.3 or later
The application specified in [Preferences] - [General] - [Default Email Reader]
in the menu bar of Mail
•
For Mac OS X v10.2
The application specified in [System Preferences] - [Internet] - [Email] -
[Default Email Reader]
Note that the following e-mail software is supported.
- Mail
®
- Microsoft Entourage
5.2 Saving Data in the Specified Folder
®
2004 for Mac
ScanSnap S300M Operator's Guide
5
87