HAKO Scrubmaster B 310 R/WZB 960 Instruction Manual page 33

Operation
• Flashing beacon (Fig. 15/3)
(7585.02
Assembly on the cab safety roof) 
(7585.10 
Assembly on a pole / without cab
safety roof) 
Purpose: To recognize the vehicle
more clearly when in use, even in the
dark.
• Spraying-vacuuming tool 
(Fig. 15/4) 
Purpose: For the manual cleaning of
areas difficult to access using scrub-
bing and vacuuming tools. 
A holder can be installed on the left-
hand side of the vehicle to fix the
vacuuming tool. Two holes are al-
ready drilled in the left-hand side of
the vehicle for this. The correspond-
ing switch is provided on the right-
hand operating panel to operate the
vacuuming tool.
The following belong to the spraying-
vacuuming tool:
- Floor scrubbing and vacuuming
tool (7009)
- Suction and spraying hose
(7766)
- Tool holder and attachment
parts (7311.10)
• Hand-held vacuum cleaner 
(Fig. 15/4)
Purpose: To vacuum up water man-
ually in areas difficult to access using
the vacuuming tool.
The hand-held vacuum cleaner can
be fixed to the tool holder (refer to
spraying-vacuuming tool).
The hand-held vacuum cleaner con-
tains:
- Adapter to connect the following
tools (7893)
- Flexible plastic extension hose,
length: 3 m (7880)
- Suction pipe (for connection to the
plastic extension hose), 
length: 1.3 m (7881)
- Suction nozzle with rubber lips
(7883)
With regard to accessories
such as rotary brushes, suction
lips etc., (Fig. 15/4) please re-
fer to our spare parts catalog in
the Internet at www.hako.com.
• Side brush unit (Fig. 15/5)
(7586.10) 
Comprised of two side brushes, one
for the right and one for the left side
of the vehicle, which can be pivoted
out.
Purpose: To enable effective clean-
ing along borders and sweep coarse
dirt to the center of the vehicle.
• Set of non-slip wheels
Purpose: For safe, reliable operation
of the vehicle on particularly slippery
floors.
33