HAKO Scrubmaster B 310 R/WZB 960 Instruction Manual page 21

Starting Up
onto the pins (Fig. 8/1) of the brush
support (Fig. 8/2).
Ensure that the contact surfac-
es (Fig. 6/2) are clean. Clean
them thoroughly, if necessary,
before fitting them on the brush
holder (Fig. 6/4).
8. Slide the locking lever (Fig. 5/1) to
the middle of the device and hold it
there.
9. Mount the brush holder (Fig. 6/4) on
the rotary brush (Fig. 6/3), press
against the housing (Fig. 6/1) and
then slide upwards.
10.Pivot the locking lever (Fig. 5/1)
back under the brush holder 
(Fig. 6/4) to the stop.
11.Close the deflector (Fig. 4/1): 
Take hold of the grip (Fig. 4/3), raise
the deflector (Fig. 4/1), pivot to the
device and lower into the deflector
lock (Fig. 4/2). 
The deflector (Fig. 4/1) is now in its
working position.
21